Applicable area:

Applicable for advertisement, double face board and scutcheon, department brand, chest brand and the architecture board, ABS brand, the engraving and cutting of acrylic and the engraving of many jade article

Characteristics:

Fast speed, high efficiency, the idle speed can reach 32m/min.

In the engraving of the wave board the speed can reach over 20m/min.

Big bearing redundancy, long life. The equipment adopts square and strait line contrail, the contact is face to face. To the high CNC data control equipment, the lifetime of the strait line is 2200 times the common ones.

The power of the main axis is big, the steel is of high quality. The main axis is suitable for the engraving on the copper, aluminum, iron. It is most suitable for the engraving of wood.

Double engine drive, special double gear running, the strength is big, the running is stable, guarantee it to run without distortion and totter.

All through offline running function: At the working process, all the system can run by itself and need no computer.

TYPE R3D1326
X, Y, Z Working Area 1300x2600x200mm
Table Size 1420× 3040mm
X, Y, Z Traveling Positioning Accuracy ± 0.05/300mm
X, Y, Z Repositioning Positioning Accuracy ± 0.05mm
Table Surface Vacuum Ttable (Option: T-slot table)
Frame Welded strucutre
X, Y Structure Rack and Pinion Drive, Hiwin Rail Linear Bearings
Z Structure Ball Screw, Hiwin Rail Linear Bearings
Max. Power Consumption (Without spindle) 2.0Kw
Max. Rapid Travel Rate 32000mm/min
Max. Working Speed 20000mm/min
Spindle Power Motor 4.5Kw Spindle
Spindle Speed 0-24000RPM
Drive Motors Stepper system(Option: Servo System)
Working Voltage AC220V/50/60Hz, 1pH (Option: 380V 3pH)
Command Language G Code
Operating System DSP System (Option: Mach3 PC Software)
Flash Memory 128M(U Disk)
Collet ER25
X, Y Resolution <0.02mm
Software Compatability Type3 software, Ucancam software(Option: Artcam software)
Gross Weight 1300KG